Orders placed by 4pm CST ship same day!  Note: We will be closed 11/27-11/28 for the Thanksgiving holiday.  Our website will still accept orders and we will process and ship them when we return on 12/1. Thank you and have a happy Holiday!

How to Make Cookie Cutter Pillar Candles

printer-friendly-button.jpg

Start by gathering all the items that you will need. The candle making process will go much more smoothly if everything is readily accessible.

Materials Needed:

This project is easy, fun and can be adapted easily to different holidays by simply using a different cookie cutter. 

Cover your work area with butcher paper or newspaper. Spills or drips are most times unavoidable, and clean up is much easier if you don’t have to clean wax off of your work surface.

heart-pillar-step-1.jpg

Step 1 – Measure out the wax

For this project a 15.25" x 10.25" x .75" cookie sheet and IGI 1343 wax was used. 

heart-pillar-step-2.jpg

Step 2 - Cut the pillar wax

Cutting the pillar waxes can be tricky.  For this demonstration, the wax is scored with a utility knife.  Then, the scored piece is placed on the remaining slab and pressure is applied to help break the wax on the score.  You may need to do this a few times to get the wax in small enough pieces to fit in the pouring pot.  (Be careful not to cut yourself or smash your fingers while doing this.)  The wax can be weighed in the pouring pot so you do not have to transfer it from a different container.

heart-pillar-step-3.jpg

Step 3 - Melt the wax

The wax will need to be heated in a double boiler to 175° - 185°F, depending on the wax you have chosen.  To create a double boiler, put about an inch of water in the sauce pan, and then place the pouring pot in the water.  It is a good idea to add an inexpensive metal trivet or metal cookie cutter under the pouring pot to elevate it.  Doing this ensures the wax is not receiving direct heat from any side.  Adjust the heat to a medium-low setting.  The water needs to be boiling, but it does not have to come to a rolling boil.  If the water is at a rolling boil, it may splatter out of the pan.  Check the temperature of the wax occasionally to make certain it is not getting too hot.  Adjust the temperature as needed.  While the wax is melting, use a cooking spray and coat the cookie sheet that will be used.  This will help the wax to release more easily when the wax has cooled.

heart-pillar-step-4.jpg

Step 4 – Measure & add fragrance oil

Once the wax has reached the proper temperature, you are ready to add the fragrance oil.  Depending on the wax you are using, you could add 0.5 – 1.0 ounce of fragrance per pound of wax.  It is most common to add 1 ounce of fragrance per pound of wax.  The fragrance is most accurately measured by weight, but you can also use a tablespoon to measure it if the scale you have does not measure a small amount precisely.  A tablespoon is equal to 0.5 ounce.  Pour the fragrance into the wax and stir it.

heart-pillar-step-5.jpg

Step 5 – Measure & add dye
(using dye blocks)

Next, add the desired amount of dye. If using dye blocks, the block will melt into the wax more quickly if it is cut into small pieces.  After adding the desired amount, stir the mixture until it is blended thoroughly.  Skip to step 7 if you are using dye blocks.

heart-pillar-step-6.jpg

Step 6 - Measure & add dye
(using liquid dye)

If using liquid dyes, just add the desired amount of drops. Since you can not remove dye once it has been added, it should be added sparingly, especially if you are trying to achieve a light color. You can always add a little more if it is not dark enough. After adding the desired amount, stir the mixture until it is blended thoroughly.

heart-pillar-step-7.jpg

Step 7 – Test your color

When you look at the liquid wax, it will usually look much darker than when it has completely cooled.  To test the color, you can drip a small amount of wax onto a paper plate or paper towel.  (Make sure not to drip the hot wax on your hands).  Allow it to harden, and you will be able to see a more accurate representation of the color.  You can then add more dye if desired.

heart-pillar-step-8.jpg

Step 8 - Add UV Stabilizer (optional) and mixing

At this point, you can add UV stabilizer if you choose. The addition of UV stabilizer will help keep the color from fading if the candles are exposed to UV rays or fluorescent lighting. You would add about ½ teaspoon per pound of wax.  Mix everything together very thoroughly.  Mixing it for 3 – 5 minutes would be best.  Check the temperature again to make sure it is between 175° - 185°F.  Remove the pouring pot from the double boiler.  The handle of the pouring pot may heat up slightly, so be sure to use a hot pad or something to protect your hand.  You may also want to set the pouring pot on a few paper towels to absorb the water from the double boiler.

heart-pillar-step-9.jpg

Step 9 – Pour the wax mixture

Slowly fill the cookie sheet.  Do not pour too quickly or wax will splash off the cookie sheet.  Fill the cookie sheet or pan about 1/4" deep.  It may be necessary to elevate part of the pan if it is not on a level surface.

heart-pillar-step-10.jpg

Step 10 – The wax is starting to set

Let the wax harden, but it should still be warm.  You can test a small corner of the wax to see if it is ready.  Press the cookie cutter into the wax.  The wax should be pliable, but you do not want it to be liquid in the center.  If wax seeps from the edges when you remove the cookie cutter, let it cool a little longer.  The shape can be cut again if this happens.

heart-pillar-step-11.jpg

Step 11 – Cut the shapes

Use the cookie cutter to make preliminary cuts in the wax; make sure to press it firmly to the pan.  Do not try to remove the wax pieces as you cut them because they will still be too soft.  The wax needs to cool more before you remove them, but you don't want it to cool completely.  Allow the wax to cool for a short time, and then use your cookie cutter to cut the shapes again.

heart-pillar-step-12.jpg

Step 12 – Get the pieces ready to stack

It is easiest to cut the excess wax from around the shapes rather than trying to remove the shapes first.  Using a butter knife, cut small pieces of the excess wax making sure not to disturb the shapes you have cut.  Lift the shapes from the cookie sheet using a spatula.  They can be left on the cookie sheet or placed on butcher paper.

heart-pillar-step-13.jpg

Step 13 – Poke wick holes

Choose one of the shapes to use as a guide for creating a wick hole.  Using the sharp end of a skewer, carefully poke a hole in the center of the shape.  Then place your guide piece on top of the others individually to use it as a template so your wick holes will be consistent.

heart-pillar-step-14.jpg Step 14 – Threading the wick

Gently thread the wick through the holes in the shapes.  Be careful with the first 2 - 3 pieces as you press them over the wick tab; these pieces may fracture or break if the wax has cooled too much.  Apply a pillar caution label to the bottom.

finished-heart-pillar.jpg

That's it!

You're finished! - You can stack the shapes evenly or spiral them to create a different look.  You can also vary the colors that you use or use varying sizes to give your candle a tapered appearance.  Be creative! 

Are you ready to give it a try?  G
et everything you need to start making candles by browsing our selection of candle making supplies or by simply clicking on the items in the Materials List at the top of this page to take you directly to that item on our website.  Have fun!

NOTE:  Be careful when moving these candles.  They are individual pieces that are not secured together in any way.  Make sure you pick them up with support on the top and bottom.

section-previous.gif Now you should be ready to
Step by Step Candle Making Guides Shop For Candle Supplies!
Since 1999

Lone Star Candle Supply, Inc.
5800 Park Vista Circle Keller, TX  76244
P: (817) 741-0876 or T: (800) WAX-WICK F: (817) 741-0879

e-Check